What your Google title and description should say. Eagle‑eyed, to the pixel

Alex · Founder of Magpie AI
Published · 7 min read

In short
A landing page's title should say what the product does in the buyer's words, then the site's name, short enough to fit a result's width, since Google cuts by width rather than characters. The meta description should sum up the page in one or two sentences. Google rewrites titles that are half-empty, out of date, inaccurate or repeated across pages.
Contents
Your result in Google is a name, a blue line and a couple of grey ones. The blue line is your title, or whatever Google wrote in its place. The grey lines are your meta description, or a bit of your page that Google picked instead. If either comes out cut off mid-word or rewritten, the cause is usually something on the page you can change.
Getting named in AI answers overlaps with this, but it brings crawlers and rules of its own. This one's about the blue link.
Google cuts by width, not characters#
Google doesn't set a limit on either. Its documentation says they're shortened "as needed, typically to fit the device width", and it doesn't publish what that width is in pixels.
Which is why counting characters misleads people. In Arial at 20px, roughly a desktop title's size, a capital W takes almost 19 pixels and a lower case i under 5, so a title made of Ws would run out of room after about 30 characters and one made of i's would last about 130. Nobody writes either, obviously. Real titles land somewhere in between, and it tends to be one long word near the end that tips them over.
The figure most tools use, and the one I've used in the example further down, is about 580 pixels for a desktop title and about 920 for the description. It's an estimate and I'd treat it as one. If what matters sits in the first half of the title, a cut won't cost you much.
When Google rewrites your title#
In August 2021 Google changed how it writes title links, and its Search Liaison, Danny Sullivan, said the <title> element was still the source "more than 80% of the time". After feedback, a follow-up post in September put it at about 87%. Those are 2021 figures and neither post gives a newer one, so I'd guess the share has moved since, without being able to say which way. The same system "generally" stopped changing titles by the query, though snippets still change with every search.
The September post named four cases where Google goes looking for other words.
| Your title is | What Google does |
|---|---|
| Half-empty, "| Site Name" | Fills in the product's name from the page |
| Out of date, "2020 ..." | Puts in the year the page's own headline shows |
| Inaccurate | Cuts it to what the page actually holds |
| The same on several pages | Adds what tells each page apart, such as "Season 1" |
Today's documentation adds more. One is a page with several big headings and no clear main one. Another is a title in a different language, or a different alphabet, from the page itself. A third is the site's name repeated. And a title with last year's date in it is a lame duck already.
When it does rewrite, Google draws on the main title a visitor sees, the <h1> and other headings, og:title, large prominent text, the words of links pointing to the page and WebSite structured data. I haven't found a switch to turn rewriting off. You can give it no reason to, though.
Put your site's name last, and briefly#
Google's advice is to "brand your titles concisely", with the site's name once, at the start or the end, after a hyphen, colon or pipe. A longer brand line repeated on every page, it warns, "will look repetitive".
On a landing page I'd put the name last, and I don't think it's a close call. The words before it are what a stranger reads first, and the name already shows above the title as the result's site name anyway. Google even says it may drop a repeated name from the title link for that exact reason, where the site name is set for the whole domain.
That site name above the title comes from your home page, and Google picks it by itself. You can say which name you'd prefer with WebSite structured data on the home page, giving its name and url. It works for a domain or a subdomain but never for a folder such as /product, which is worth knowing if your product lives under a bigger company's site.
Make the title and the headline say the same thing#
Google's sources for a replacement title include the main title shown on the page and its <h1>, and an inaccurate title is one of its named reasons to swap yours out. So if your title and your headline disagree, you've handed Google a reason and a ready-made alternative in one go.
I'd write the first screen's headline first, about what the product does for the visitor, then let the title carry the same promise in fewer words. They don't need to match word for word (a headline can afford a few more words than a title) but a visitor should be able to tell they're about the same thing.
What the meta description should say#
Most snippets are built from the page itself. Google uses your meta description when it's "a more accurate description of the page than content taken directly from the page", and the snippet can change from one search to the next, as Google shows whichever part fits the query best.
So your description is competing with your own page for the job. The SEO Starter Guide asks for "a succinct, one- or two-sentence summary of the page", unique to it and holding its most relevant points. The bad example in Google's documentation is a sewing shop's string of keywords, from "Sewing supplies, yarn" on through machines, threads, bobbins and needles, and Google says a description like that is less likely to be shown at all.
Put the outcome first and then the detail that settles a doubt, such as a price (the same case I'd make for showing prices on the landing page itself) or "free for up to five plants". If the second sentence gets cut, the first still stands on its own.
A worked example#
Here's fernly.example, a made-up plant care app, measured the way a desktop result would draw it.
| Part | Words | Width |
|---|---|---|
| Title, before | Fernly | The future of plant care | Plant watering app, plant reminders, plant care | 709px, cut |
| Title, after | Know when each plant needs water | Fernly | 388px |
| Description, before | Plant care app, watering reminders, plant app, house plants, plant schedule, plant tracker, best plant app, plant reminder app, garden app, indoor plants | 939px, cut |
| Description, after | Snap a photo of each plant and get a reminder on your phone the day it needs watering. Free for up to five plants. | 704px |
The old title gets cut after "plant", spends its first words on a slogan and says "plant" four times, like a woodpecker stuck on one tree. The new one is just the page's headline with the name after it, and it's got room to spare. The old description is the sewing shop's mistake again in a different trade, while the new one would still make sense if Google lost its second sentence.
Checking what your result will say#
Open the page's source and you can read both, then measure them against those widths. Read it as the server sends it, mind, and not the page after its scripts have run, because a title a script sets later is easy to miss.
Magpie's full report does this in code, in its "In search results" section. It reads the title and description from the HTML the server sends, measures each in Arial's pixels and says where Google would cut it, or that the description is missing or too short to say much.
Questions people ask#
Should every page have its own description?#
Yes, and Google's fairly direct about it, saying identical or similar descriptions on every page "aren't helpful". It suggests a description of the whole site on the home page and pages that gather others, and one of its own on every other page. My guess is that most repeated descriptions come from a template that fills the field in once for the whole site, so the pricing page, the blog and the landing page all end up saying the same sentence, and nobody spots it because nobody reads the head of their own pages. It's a five-minute check, and a slightly embarrassing one if the same line turns out to have sat on every page for years.
Can I stop Google showing a snippet?#
You can. A nosnippet robots meta tag stops it, max-snippet sets its longest length and data-nosnippet keeps one part of the page out. On a landing page I'd rarely bother, since each one takes away words a searcher could've read.
Sources
- Google Search Central, Influencing title links in Google Search (opens in a new tab)
- Google Search Central, Control your snippets in search results (opens in a new tab)
- Google Search Central, Provide a site name to Google Search (opens in a new tab)
- Google Search Central, SEO Starter Guide (opens in a new tab)
- Google Search Central Blog, An update to how we generate web page titles (Danny Sullivan, August 2021) (opens in a new tab)
- Google Search Central Blog, More information on how Google generates titles for web page results (Danny Sullivan, September 2021) (opens in a new tab)

About the author
Alex · Founder of Magpie AI
Alex founded Magpie AI and writes about what turns a landing page's visitors into customers, drawing on what its audits find on real sites, from the first screen to the checkout


